Product Details
Place of Origin: China
Payment & Shipping Terms
Minimum Order Quantity: 2 pieces
Price: $280-300 / piece
Pipe Material: |
Copper |
Product Name: |
Testing Passed Pressure Copper U Pipe Solar Water Thermal Collectors |
Warranty: |
15 Years |
Application: |
House Warm |
Color: |
REQUIRED |
Heat Pipe: |
Glasses |
Temperature Resistant: |
20degrees -115degrees |
Specification: |
OEM\ODM |
Advantage: |
Extremely High Heating Efficiency |
Installation: |
Freestanding |
Pipe Material: |
Copper |
Product Name: |
Testing Passed Pressure Copper U Pipe Solar Water Thermal Collectors |
Warranty: |
15 Years |
Application: |
House Warm |
Color: |
REQUIRED |
Heat Pipe: |
Glasses |
Temperature Resistant: |
20degrees -115degrees |
Specification: |
OEM\ODM |
Advantage: |
Extremely High Heating Efficiency |
Installation: |
Freestanding |
Pressure copper U pipe U tube solar water thermal collector
U pipe solar collector
Working principle of CENTURY SUN U pipe solar collector.
The CENTURYSUN U pipe solar collector consists of 3 main components
1. ALL glass vacuum tube
2. Heat transfer system(solar cycle)
3. Frame
In each vacuum tube there is a U pipe with direct flow-through that is connected to the header pipe inside manifold. This U pipe is seamed in an aluminum heat transfer fin in the interior of vacuum tube that transmits the heat FROM the interior tube to the U pipe.
Solar radiation permeates the outer glass tube and is captured on the outside of inner glass tube by highly selective sputter layer. The captured solar radiation is transmitted to flush-contact aluminum shield and then copper pipe filled with heat transfer fluid. The 360°aluminum heat transfer fin assures the fastest energy transfer.
TECHNICAL SPECIFICATION
|
Model Name |
CSU10/47 |
CSU16/47 |
CSU12/58 |
CSU20/58 |
|
Manifold casing material |
Anodized aluminum |
Anodized aluminum |
Anodized aluminum |
Anodized aluminum |
|
Frame material |
Anodized aluminum |
Anodized aluminum |
Anodized aluminum |
Anodized aluminum |
|
Header pipe material |
Copper |
Copper |
Copper |
Copper |
|
U pipe material |
Copper |
Copper |
Copper |
Copper |
|
U pipe diameter |
8mm |
8mm |
8mm |
8mm |
|
No. of pipes |
10 |
16 |
16 |
20 |
|
Diameter/length of Vacuum tube |
47mm/1500mm |
47mm/1500mm |
58mm/1800mm |
58mm/1800mm |
|
No. of vacuum tube |
10 |
16 |
12 |
20 |
|
Aperture area |
0.61m2 |
1.00m2 |
1.08m2 |
2.03m2 |
|
Gross area |
1.2m2 |
1.93m2 |
2m2 |
3.00m2 |
|
Insulation |
Rock wool |
Rock wool |
Rock wool |
Rock wool |
|
Rubber seals and rings |
UV stabilized silicon rubber |
UV stabilized silicon rubber |
UV stabilized silicon rubber |
UV stabilized silicon rubber |
|
Test pressure |
9 bar |
9 bar |
9 bar |
9 bar |
|
Collector mounting |
Flat roof/inclined roof |
Flat roof/inclined roof |
Flat roof/inclined roof |
Flat roof/inclined roof |
|
Mounting angle |
0 degree-90 degree |
0 degree-90 degree |
0 degree-90 degree |
0 degree-90 degree |
|
Gross weight |
28KG |
40KG |
43KG |
65KG |
Different size collectors available on request
Image for reference only and may not be exactly same as real products.
PERFORMANCE
CSU collector has been tested to EN12975 and achieved a comparable high efficiency and with a very small heat loss coefficient. The COST/KWH value is smaller than most other collectors which mean you pay less for each KWH out put for our collector.
Above DATA is given to absorber area
